4G / 5G cellular
High-throughput mobile connectivity where fibre or copper can't reach.
- 4G LTE and 5G
- Fallback to 3G / 2G
- Wide coverage for remote feeders
Product · Industrial communication
Industrial routers & M2M gateways for field connectivity.
Rugged 4G/5G cellular routers, IP gateways and M2M modems that connect your field equipment — detectors, RTUs, meters, reclosers — to the control centre. LTE/5G, Ethernet and serial interfaces, VPN security and dual-SIM failover keep even the most isolated site online.
Key specifications
- Cellular: 4G LTE / 5G
- Interfaces: Ethernet, RS232 / RS485
- Security: VPN, dual-SIM (model-dependent)
- Use: industrial & isolated sites
Capabilities
Keep every field device connected — anywhere.
From a substation RTU to a fault detector on an isolated feeder, an industrial router turns any remote asset into a live, reachable point on your SCADA or IoT platform.
Wired & serial interfaces
Connect legacy and modern equipment through the ports they actually use.
- Ethernet (LAN / WAN)
- RS232 / RS485 serial
- Modbus & industrial protocols
VPN & security
Encrypted tunnels keep your telemetry and telecontrol private.
- IPsec / OpenVPN tunnels
- Firewall & access control
- Secure remote access
Dual-SIM failover
A second operator keeps the link up when the first one drops (model-dependent).
- Automatic SIM switchover
- Multi-operator resilience
- Uninterrupted uptime
Industrial-grade
Built to survive substations, cabinets and outdoor enclosures.
- Wide temperature range
- DIN-rail mounting
- Robust power input
Remote management
Configure, monitor and update the fleet from a central platform.
- Remote configuration
- Status & watchdog
- Firmware over-the-air
Technical selection
Typical specifications.
Indicative characteristics — exact features depend on the selected Four-Faith model (e.g. F3X27, F2X14-DK). Ask us for the datasheet matched to your deployment.
| Characteristic | Typical value |
|---|---|
| Cellular | 4G LTE / 5G (with 3G / 2G fallback, model-dependent) |
| Wired interfaces | Ethernet, RS232 / RS485 serial |
| Protocols | TCP/IP, Modbus, MQTT and industrial protocols (model-dependent) |
| Security | VPN (IPsec / OpenVPN), firewall |
| SIM | Single or dual-SIM failover (model-dependent) |
| Management | Remote configuration, watchdog, firmware OTA |
| Mounting | DIN-rail / panel, industrial enclosure |
| Environment | Wide operating temperature, robust DC power input |
How it fits
The link between the field and the control room.
Field devices speak serial or Ethernet; the control centre speaks SCADA over IP. The router bridges the two over an encrypted cellular link — turning an isolated pole or RMU into a connected node.
/01
Field devices
Detectors, RTUs, meters and reclosers connect via Ethernet or serial.
/02
Router & VPN
The router aggregates them and opens an encrypted cellular tunnel.
/03
SCADA / cloud
Data reaches your control centre or IoT platform in real time.
300+
Devices deployed on the CI-ENERGIES network
As part of the NEDA project (World Bank funding), more than 300 units were installed on the Ivorian distribution network — proof, at scale, of the group's ability to deploy connected field equipment, delivered by ENERTEC.
NEDA PROJECTCI-ENERGIES
WORLD BANKFunding
WORLD BANKFunding