Multi-parameter measurement
All the key electrical quantities from a single unit.
- Voltage, current, frequency
- Active / reactive / apparent power
- Power factor & energy
Product · Energy metering
Multifunction power meters for energy & power quality.
Measurement units that turn a substation or industrial board into a monitored asset: they measure every electrical quantity, analyse harmonics, raise configurable alarms and feed it all to your SCADA — so you know exactly what your network is doing, in real time.
Key specifications
- Measurement: V, I, P, Q, PF, frequency, energy
- Power quality: harmonic analysis
- Alarms: configurable thresholds + SOE
- Comms: network / SCADA
Capabilities
Measure everything, miss nothing.
Beyond a simple energy count: a multifunction meter that watches power quality, flags problems the moment they appear, and time-stamps every event for analysis.
Harmonic analysis
See power-quality issues that a basic meter would miss.
- Harmonic spectrum
- Total harmonic distortion (THD)
- Voltage & current quality
Configurable alarms
Set thresholds on any parameter and be alerted before it becomes a problem.
- Over / under thresholds
- Per-parameter setpoints
- Local & remote notification
Sequence of events (SOE)
Every event time-stamped, in order, for precise diagnostics.
- Time-stamped events
- Chronological log
- Post-event analysis
Network communication
Feed measurements straight into your supervision system.
- Modbus & industrial protocols
- Dual-network options
- SCADA integration
Energy management
Turn measurement into savings across sites and circuits.
- Consumption trends
- Sub-metering
- Load & billing insight
Technical selection
Typical specifications.
Indicative characteristics — exact features and accuracy class depend on the selected Four-Faith model. Ask us for the datasheet matched to your installation.
| Characteristic | Typical value |
|---|---|
| Measurement | Voltage, current, active/reactive/apparent power, power factor, frequency, energy |
| Power quality | Harmonic analysis (e.g. 2nd–31st), THD |
| Alarms | Configurable thresholds per parameter |
| Events | Sequence of events (SOE), time-stamped log |
| Communication | Modbus / industrial protocols, dual-network, SCADA (model-dependent) |
| Display | Local display / LEDs (model-dependent) |
| Mounting | Panel / DIN-rail |
| Applications | Substations, industrial boards, power-quality & energy monitoring |
How it works
From the busbar to the dashboard.
The meter samples voltage and current at the point of measurement, computes power, energy and harmonics, checks them against your alarm thresholds, and streams the whole picture to SCADA.
/01
Measure
Voltage and current sensing at the substation or board.
/02
Analyse
Power, energy, harmonics and alarms computed in real time.
/03
Report
Measurements and events flow to SCADA over the network.
300+
Devices deployed on the CI-ENERGIES network
As part of the NEDA project (World Bank funding), more than 300 units were installed on the Ivorian distribution network — proof, at scale, of the group's field track record, delivered by ENERTEC.
NEDA PROJECTCI-ENERGIES
WORLD BANKFunding
WORLD BANKFunding